FT-FAT 200 Timing Systems
FT-FAT 200 Timing Systems  FT-FAT 200 Timing Systems  FT-FAT 200 Timing Systems  FT-FAT 200 Timing Systems  FT-FAT 200 Timing Systems 

FT-FAT 200 Timing Systems

  • Brand: Flash Timing
  • model:%s fat200x
  • Availability: In Stock
  • $6,645.00



Available Options


PACKAGES (SELECT CHECKBOXES AND ADD TO CART FOR SPECIFIC PRICING OF EACH PACKAGE). All Packages include:  2 radio units, software and digital
camera with lens, 25ft Ethernet cable, power supply and camera cover.

The FT-FAT200 is a digital based timing system with faster frame rates and higher resolution.

Our fully automatic timing systems combined with our easy to use software, allow you to host a quality track meet with accurate times and fast results.

FT-FAT200 is a video-based system with frames rates up to 200fps (one frame every 0.005) second. At 200 fps a typical sprinter moves less than the width of the finish line between video frames. The 200 fps frame requires an appropriate Windows based computer and the frame rate can be adjusted downward to support older computers.

Our new finish line camera has an increased resolution of 600 X 800. The resulting video produces a sharper image and increased visibility of the hip numbers.

FT-FAT200 is radio linked, so there’s no need to wire the starter or point a timing device at the starter’s pistol.

No more recalls due to difficult-to-aim timers missing the light from the starter’s pistol. The system allows the starter and timing officials to signal to each other that they’re prepared for the next race. Everyone is ready when it’s time to start the race. FT-FAT200 is reliably triggered by a .22 or .32 caliber starting pistol, so no special ammunition is require.

FT-FAT200 includes the digital video camera, starter radio unit, USB linked timer radio unit, POE/Switch, software and weather-resistant camera cover:

200fps IP Finish Line CameraOur video IP camera requires a 1Gigabit Ethernet connection and comes with 25Ft Cat6 Ethernet cable and a 1GB POE/Switch to connect your computers and power the camera. The camera is enclosed in a  new weather resistant housing, which is machined from a solid block of aluminum and is well sealed to resist inclement weather.

Wireless Starter Unit There is no need for a cable between the starter and the timing system. A wireless radio link provides an accurate start time using our patented* synchronizing method that accounts for any radio transmission delays.

USB Radio The radio is attached to the capture computer and is used to communicate with the Starter Unit and the Camera.  We provide a Patented Hand Shake* between Starter and Timing Officials, which lets the official know everyone is ready for the next heat to start.

FlashTiming Software Our software lets you capture and record video on one computer while another computer reviews videos from previous races.  We interface with a variety of scoring packages, including Hy-Tek.

 

 

 

PACKAGES (SELECT CHECKBOXES AND ADD TO CART FOR SPECIFIC PRICING OF EACH PACKAGE). All Packages include:  2 radio units, software and digital
camera with lens, 25ft Ethernet cable, power supply and camera cover.

FAT-200 Ultimate Package: - includes FT-FAT 200, FTDisplay, Camera Stand, Starter Stand

FAT-200 Essential Package: - Includes FT-FAT 200, FT-Display, Camera Stand

FAT-200 DisplayPackage:  - includes FT-FAT 200, FTDisplay

FAT-200 Complete Package:  - includes FT-FAT 200, Camera Stand, Starter Stand

FAT-200 Camera Stand Package:  - includes FT-FAT 200, Camera Stand

NOT ALL ITEMS PICTURED ARE INCLUDED IN ALL PACKAGES.

You supply the Laptop(s) to use, Recommended specs are:
• Pentium i5 2.5Ghz or better**
• 8GB of Ram
• 200GB Hard Drive
• 1366 x 768 Screen Resolution (1980 x 1080 recommended)
• USB 2.0
• 1Gbps Ethernet Port
• Windows 7 or later, 64bit OS
** Performance may vary depending on CPU variables. Frame rates are adjustable to accommodate slower processors.  

Three Year WarrantyAll of our products come with a 3 year warranty for any failures except for those caused by improper use.

Optional: Implementation support - Year 1 @ $899  - Up to 5 hours of training and support for first year set up, use and troubleshooting.
General use support - 2 year @ $1499 - Up to 12 hours of training and support for the first 2 years of set up, use, and troubleshooting.

There are no reviews for this product.

Write a review

Please login or register to review

Tags: FT-FAT 200 Timing Systems,